BitPost Brush On Post & Rail Fence Stain & Preserver - 4L

BitPost ™ is an alternative product for Creosote or Carbolineum. It is a New Zealand manufactured bituminous oil based emulsion / polymer product.

Because of its rot-resisting and disinfecting effect  BitPost ™ is ideally suited for the preservation and staining of wooden structures such as Post and Rail fences Retaining walls and Construction timber framing etc. It is also suitable to preserve in-ground planted posts.

Timber requires one coat only and One (1) Litre will cover approximately 2 to 3 Square Meters. On Post and (3 rails) fence 1 Litre will cover approximately 2 to 3 linear meters stained on both sides.

• 4ltr will cover 8 to 12 Square Meters or 8 to 12 linear meters of Post & Rail Fence
• 20ltr will cover 40 to 60 Square Meters or 40 to 60 linear meters of Post & Rail Fence
• 200ltr will cover 400 to 600 Square Meters or 400 to 600 linear meters of Post & Rail Fence

BitPost ™ - Brush on is intended primarily for surface application by brushing dipping or by airless spray equipment.
BitPost ™ - Brush on Gives an economical yet high quality finish which is ideal for larger projects.

A re-coat will be required after 3 to 5 years where after it will last another 8 to 10 years before coating again. The colour is black to very dark brown.

FEATURES

• BitPost ™ is an alternative product for the use of Creosote or Carbolimium which has been limited and/or forbidden by some countries due to the introduction of stricter environmental regulations.
• BitPost ™ will retard distortion movement and splitting of timber due to weather exposure
• BitPost ™ is non-corrosive to metals
• Can be used on other wood structures
• Suitable on in-ground Posts
• Will penetrate the timber rapidly
• For best results apply to dry timber

• BitPost ™ is idealy suited for:
• Horse Fencing : Detere horses to nibble on coated fence
• Chicken Coops : BitPost will reduce the risk of RED MITE infestation
• Vegetable Gardens : BitPost can be used on boxes and stakes

TECHNICAL SPECS

For more detailed information please see our documents below.

Packaging: Available in 4 20 and 200 Litre containers. Plastic jerry can Metal flasks with bericap Plastic open top paint bucket Metal open top paint pail and Metal drum with bungs. 

BitPost ™ is an oily water emulsion water-soluble non-flammable black to very brown mixture from bitumen water and petroleum components smelling of tar.
BitPost ™ is a New Zealand manufactured creosote alternative bituminous emulsion / polymer product which will penetrate the timber rapidly due to its viscosity.
BitPost ™ gives a high degree of water repellence and will retard distortion movement and splitting of timber due to weather exposure.
BitPost ™ preserver is non-flammable and the treated wood after drying presents no greater fire hazard than ordinary timber.
BitPost ™ is non-corrosive to metals and can have a protective action on iron and steel.
BitPost ™ is non toxic and is safe around your animals.

Material Safety Data Sheet    /      Brochure