Model: JH4790
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Suitable for gauged 47mm thick timber up to 150mm deep.Joist Hanger connections should be fixed using LUMBERLOK Product Nails 30mm x 3.1..
$3.12
Ex Tax:$2.71
Model: JH52120
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Joist Hanger connections should be fixed using LUMBERLOK Product Nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws...
$3.59
Ex Tax:$3.12
Model: JH52190
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.For use on rough sawn timberJoist Hanger connections should be fixed using LUMBERLOK Product Nails 30mm x 3.15mm diameter, or Type 17-12..
$5.91
Ex Tax:$5.14
Model: JH5290
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.For use on rough sawnJoist Hanger connections should be fixed using LUMBERLOK Product Nails 30mm x 3.15mm diameter, or Type 17-12g x 35m..
$3.12
Ex Tax:$2.71
Model: JH95165
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Joist Hanger 95 x 165For use on gauged 94mm wide timber or double joists/trusses.Joist Hanger connections should be fixed using LUMBERLO..
$9.21
Ex Tax:$8.01
Model: SSJH47120
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.Joist Hanger connections should be fixed using LUMBERLOK Stainl..
$11.02
Ex Tax:$9.58
Model: SSJH47190
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Suitable for gauged 47mm thick timber up to 300mm deep.Joist Hanger connections should be fixed using LUMBERLOK Stainless Steel Product ..
$18.34
Ex Tax:$15.95
Model: SSJH4790
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Suitable for gauged timber of 47mm width and up to 150mm deep.Joist Hanger connections should be fixed using LUMBERLOK Stainless Steel P..
$8.88
Ex Tax:$7.72
Model: SSJH52120
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Suitable for rough sawn 52mm wide timber up to 200mm deepJoist Hanger connections should be fixed using LUMBERLOK Stainless Steel Produc..
$11.02
Ex Tax:$9.58
Model: SSJH52190
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Suitable for rough sawn 52mm timber up to 300mm deepJoist Hanger connections should be fixed using LUMBERLOK Stainless Steel Product Nai..
$18.30
Ex Tax:$15.91
Model: SSJH95
Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.Suitable for gauged 95mm wide timber on double joist/trussesJoist Hanger connections should be fixed using LUMBERLOK Stainless Steel Pro..
$19.57
Ex Tax:$17.02
Model: WDLHG
Wire Dogs are manufactured as left handed, right handed, and staples, from 4.9mm diameter galvanised wire.Each has a 95mm shank, and a 35mm leg.Wire Dogs have been proven by test to be the strongest and most economicaltimber fastener of its type on the New Zealand market.Typical use in a wind u..
$0.66
Ex Tax:$0.57
Model: SSWDLH
Wire Dogs (LH, RH or Staple) Wire Dogs are manufactured as left handed, right handed, and staples, from 4.76mm diameter stainless steel wire.Each has a 95mm shank, and a 35mm leg...
$2.91
Ex Tax:$2.53
Model: LG
This hammer on, snap off connector is suitable for economical quick fastening of building paper, shade cloth, plastic sheeting etc...
$1.28
Ex Tax:$1.11
Model: MB10
0.91mm x 53mm G300 Z275 Galvanised Steel This product has been developed for commercial building situations as an alternative to steel rod or timber as a bracing element. Coils are available in lengths of 10m, 15m and 30m, punched to allow easy fixing, using 11 x LUMBERLOK Product Nails 3..
$49.78
Ex Tax:$43.29
Special Order
Model: MB15
0.91mm x 53mm G300 Z275 Galvanised Steel This product has been developed for commercial building situations as an alternative to steel rod or timber as a bracing element. Coils are available in lengths of 10m, 15m and 30m, punched to allow easy fixing, using 11 x LUMBERLOK Product Nails 3..
$89.01
Ex Tax:$77.40
Model: MB30
0.91mm x 53mm G300 Z275 Galvanised Steel This product has been developed for commercial building situations as an alternative to steel rod or timber as a bracing element. Coils are available in lengths of 10m, 15m and 30m, punched to allow easy fixing, using 11 x LUMBERLOK Product Nails 3..
$134.90
Ex Tax:$117.30
Special Order
Model: SSMB10
This product has been developed for commercial building situations as an alternative to steel rod or timber as a bracing element. Coils are available in lengths of 10m, 15m and 30m, punched to allow easy fixing, using 11 x LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter at each end.&n..
$235.46
Ex Tax:$204.75
Special Order
Model: MBSS15
This product has been developed for commercial building situations as an alternative to steel rod or timber as a bracing element. Coils are available in lengths of 10m, 15m and 30m, punched to allow easy fixing, using 11 x LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter at each end.&n..
$261.46
Ex Tax:$227.36
Special Order
Model: MBSS
This product has been developed for commercial building situations as an alternative to steel rod or timber as a bracing element. Coils are available in lengths of 10m, 15m and 30m, punched to allow easy fixing, using 11 x LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter at each end.&n..
$510.29
Ex Tax:$443.73
Special Order
Model: MBT
Tensioner for Multi-Brace (optional)...
$20.30
Ex Tax:$17.65
Special Order
Model: MGS
Multigrip 0.91mm G300 Z275 Galvanised Steel LUMBERLOK Multigrips are a multipurpose product that can be bent into any of five combinations. One product provides for all alternatives with the bending slot enabling easy on-site bending.Size 125mm high x 38mm flanges. Fix with LUMBERLOK Produ..
$1.30
Ex Tax:$1.13
Model: PN4501
Spiral Rolled Nails45mm x 3.55mm diameter Flat Head. Approx 240 Nails..
$25.12
Ex Tax:$21.84
Special Order
Model: PNS9001
LUMBERLOK Product Nails (Annular Grooved) Stainless Steel 316 90mm x 4.0mm diameter F.H. (1kg bags)..
$68.25
Ex Tax:$59.35
Special Order
Model: NPG110160
Nailon is produced as a flat steel plate with prepunched holes to accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter.Nailon provides a very strong site joint for truss splicing, rafter connections, etc.Lumberlok Nailon is a very versatile steel plate with many applications in timber construc..
$4.16
Ex Tax:$3.62
Model: SSNP116
Nailon is produced as a flat steel plate with prepunched holes to accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter.Nailon provides a very strong site joint for truss splicing, rafter connections, etc.Lumberlok Nailon is a very versatile steel plate with many applications in timber construc..
$8.14
Ex Tax:$7.08
Model: SSNP120
Nailon is produced as a flat steel plate with prepunched holes to accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter.Nailon provides a very strong site joint for truss splicing, rafter connections, etc.Lumberlok Nailon is a very versatile steel plate with many applications in timber construc..
$10.19
Ex Tax:$8.86
Model: NP120
Nailon is produced as a flat steel plate with prepunched holes to accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter.Nailon provides a very strong site joint for truss splicing, rafter connections, etc.Lumberlok Nailon is a very versatile steel plate with many applications in timber construc..
$4.99
Ex Tax:$4.34
Model: SSNP124
Nailon is produced as a flat steel plate with prepunched holes to accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter.Nailon provides a very strong site joint for truss splicing, rafter connections, etc.Lumberlok Nailon is a very versatile steel plate with many applications in timber construc..
$12.24
Ex Tax:$10.64
Model: NP124
Nailon is produced as a flat steel plate with prepunched holes to accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter.Nailon provides a very strong site joint for truss splicing, rafter connections, etc.Lumberlok Nailon is a very versatile steel plate with many applications in timber construc..
$5.89
Ex Tax:$5.12
Model: PN30B
30mm x 3.15mm diameter F.H...
$8.00
Ex Tax:$6.96
Model: PNSS30
LUMBERLOK Product Nails (Annular Grooved) Stainless Steel 316 30mm x 3.15mm diameter F.H...
$43.59
Ex Tax:$37.90
Model: RS40080
LUMBERLOK Nailon is produced as a flat steel plate with prepunched holes to
accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter. Plate sizes
vary in thickness, width and length. Standard products are manufactured using
Nailon, as well as a range of special products. Use of Nailon Plate fix..
$15.65
Ex Tax:$13.61
Model: SSRPA116
..
$15.90
Ex Tax:$13.83
Model: WDRHG
Wire Dogs are manufactured as left handed, right handed, and staples, from4.9mm diameter galvanised wire.Each has a 95mm shank, and a 35mm leg.Wire Dogs have been proven by test to be the strongest and most economicaltimber fastener of its type on the New Zealand market.Typical use in a wind uplift ..
$0.66
Ex Tax:$0.57
Model: SSWDRH
Wire Dogs (LH, RH or Staple) Wire Dogs are manufactured as left handed, right handed, and staples, from 4.76mm diameter stainless steel wire.Each has a 95mm shank, and a 35mm leg...
$2.91
Ex Tax:$2.53
Special Order
Model: CT1.8
Closet Tube This economical and attractive product is ideal as an alternative to galvanisedpipe in wardrobe situations. Closet Tube is available in lengths of 1.8m or 2.4m, and powder coated finished in white. Strong sockets are also available to support the Closet Tube ends...
$57.72
Ex Tax:$50.19
Model: CT2.4
Closet Tube This economical and attractive product is ideal as an alternative to galvanisedpipe in wardrobe situations. Closet Tube is available in lengths of 1.8m or 2.4m, and powder coated finished in white. Strong sockets are also available to support the Closet Tube ends...
$122.80
Ex Tax:$106.78
Model: SBS3
Sheet Brace Straps 0.91mm x 25mm G300 Z275 Galvanised Steel Punched strap available in lengths of 200mm, 300mm, 400mm and 600mm,to provide a hold down for use with sheet bracing. As per NZS 3604:2011, a6kN capacity can be obtained by one strap (6 nails per strap end) or 12kN pertwo straps ..
$1.37
Ex Tax:$1.19
Model: SBS4
Sheet Brace Straps 0.91mm x 25mm G300 Z275 Galvanised Steel Punched strap available in lengths of 200mm, 300mm, 400mm and 600mm,to provide a hold down for use with sheet bracing. As per NZS 3604:2011, a6kN capacity can be obtained by one strap (6 nails per strap end) or 12kN pertwo straps ..
$1.96
Ex Tax:$1.70
Model: SBS6
Sheet Brace Straps 0.91mm x 25mm G300 Z275 Galvanised Steel Punched strap available in lengths of 200mm, 300mm, 400mm and 600mm,to provide a hold down for use with sheet bracing. As per NZS 3604:2011, a6kN capacity can be obtained by one strap (6 nails per strap end) or 12kN pertwo straps ..
$3.16
Ex Tax:$2.75
Special Order
Model: SP32050
LUMBERLOK Nailon is produced as a flat steel plate with prepunched holes to
accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter. Plate sizes
vary in thickness, width and length. Standard products are manufactured using
Nailon, as well as a range of special products. Use of Nailon Plate fix..
$7.88
Ex Tax:$6.85
Model: SP40050
LUMBERLOK Nailon is produced as a flat steel plate with prepunched holes to
accommodate LUMBERLOK Product Nails 30mm x 3.15mm diameter. Plate sizes
vary in thickness, width and length. Standard products are manufactured using
Nailon, as well as a range of special products. Use of Nailon Plate fix..
$9.09
Ex Tax:$7.90
Model: SSMGS
Multigrip 0.9mm Stainless Steel 304-2B LUMBERLOK Multigrips are a multipurpose product that can be bent into any of five combinations. One product provides for all alternatives with the bending slot enabling easy on-site bending. Size 125mm high x 38mm flanges. Fix with LUMBERLOK Stainless..
$6.28
Ex Tax:$5.46
Model: WDSG
Wire Dogs are manufactured as left handed, right handed, and staples, from4.9mm diameter galvanised wire.Each has a 95mm shank, and a 35mm leg.Wire Dogs have been proven by test to be the strongest and most economicaltimber fastener of its type on the New Zealand market.Typical use in a wind uplift ..
$0.66
Ex Tax:$0.57
Model: SSWDS
Wire Dogs are manufactured as left handed, right handed, and staples, from4.9mm diameter galvanised wire.Each has a 95mm shank, and a 35mm leg.Wire Dogs have been proven by test to be the strongest and most economicaltimber fastener of its type on the New Zealand market.Typical use in a wind uplift ..
$2.91
Ex Tax:$2.53
Model: SNS
Is specifically designed for on-site use and many general applications where astrong, rigid load carrying joint is required. Strap Nails eliminate skew-nailing,scarf cutting and checking in.The Strap Nail has many applications in the furniture and packaging industries, plus having many uses for the ..
$0.70
Ex Tax:$0.61
Special Order
Model: SSSB30
Strip Brace is supplied in coils for use as bracing or use in short lengths as a jointing material.Strip Brace provides an ideal bracing system for walls, or roof plane.One crossed pair of strips may be used in each location where a diagonal brace is required.Fix using 5 x LUMBERLOK Product Nails 30..
$32.27
Ex Tax:$28.06
Model: SB30
Strip Brace is supplied in coils for use as bracing or use in short lengths as a jointing material.Strip Brace provides an ideal bracing system for walls, or roof plane.One crossed pair of strips may be used in each location where a diagonal brace is required.Fix using 5 x LUMBERLOK Product Nails 30..
$75.92
Ex Tax:$66.02
Model: SB30T
Strip Brace is supplied in coils for use as bracing or use in short lengths as a jointing material.Strip Brace provides an ideal bracing system for walls, or roof plane.One crossed pair of strips may be used in each location where a diagonal brace is required.Fix using 5 x LUMBERLOK Product Nails 30..
$89.75
Ex Tax:$78.04
Model: LLSS
Designed to secure studs to top plate, this pre-bent strap product can be applied to one face only, saving time over alternative fixing methods. In addition, when fixing to the outside of timber stud wall frames, it provides a flat internal surface for plastering. The pre-formed teeth are designed t..
$3.77
Ex Tax:$3.28
Model: 16KNTTP
Also referred to as ‘Stud Anchor’ due to being used for stud to top plate fixing,
these are a great alternative to the Sheet Brace Straps as they sit within the wall
frame. Also an ideal retro fit fixing after lining/cladding is installed. Packs are
supplied with two LUMBERLOK CPC80 cleats and th..
$16.56
Ex Tax:$14.40
Model: 10T10S
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$4.04
Ex Tax:$3.51
Model: 10T15
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$6.68
Ex Tax:$5.81
Model: 2T5
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$0.37
Ex Tax:$0.32
Model: 4T10
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$1.76
Ex Tax:$1.53
Model: 4T5
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$0.62
Ex Tax:$0.54
Model: 6T10S
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$2.12
Ex Tax:$1.84
Model: 6T15
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$4.19
Ex Tax:$3.64
Model: 8T10
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$3.63
Ex Tax:$3.16
Model: 8T15
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$5.43
Ex Tax:$4.72
Model: 8T20
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$6.50
Ex Tax:$5.65
Model: 8T5
Tylok Plate is designed for on-site use and can readily be applied by hammer as well as hydraulic press.Tylok Plates are suitable for a wide range of applications such as trusses, formwork, site splicing etc...
$1.82
Ex Tax:$1.58
Model: SC3512EG
Lumberlok Type 17-12g 35mm Electro Galvanised Screws Qty:100..
$24.73
Ex Tax:$21.50
Model: SSS12G35MM
Screws Type 17-12g x 35mm Hex Head Screws Galvanised, Electro. Galvanised andStainless Steel. Type 17-14g x 35mm Hex Head Screws Electro. Galvanised. Type 17-14g x 75mm Hex Head Screws Electro. Galvanised. ..
$63.86
Ex Tax:$55.53
Model: SC3514EG
Lumberlok Type 17-14g 35mm Electro Galvanised Screws Qty:100..
$23.89
Ex Tax:$20.77
Model: SC3514SS
..
$81.91
Ex Tax:$71.23
Model: SC7514EG
Lumberlok Type 17-14g 75mm Electro Galvanised Screws Qty:100..
$97.41
Ex Tax:$84.70
Model: SHEDSC7514EG
..
$0.78
Ex Tax:$0.68
Model: SC7514SS
..
$108.16
Ex Tax:$94.05
