Model: BPS
Screw bolt to fix timber framing down onto concrete floor slab as per Clause 7.5.12.2 NZS 3604:2011.Suitable for both external and internal wall frame anchor to concrete slab or masonry header blocks.Distinctive Blue Head.Includes washer.10 sets per bag. Building Product Information..
$42.99
Ex Tax:$37.38
Model: B163
Hot dip galvanised angle bracket to support timber members.Hot dip galvanised to AS/NZS 4680 to 600gm/m²Holes for M12 bolts Building Product Information..
$61.00
Ex Tax:$53.04
Model: B176
Hot Dip Galvanised angle brackets to support timber members at 90 degrees.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$24.50
Ex Tax:$21.30
Model: PBA
Designed to satisfy gypsum wall board and plywood bracing systems
USES
The Pryda Bracing Anchor (PBA) is designed to be used in conjunction with gypsum wallboard manufacturers bracing systems references or literature. The Pryda Bracing Anchor can satisfy the hold down requirements and is a subs..
$15.00
Ex Tax:$13.04
Model: MPFB52124
Simple means of connecting two members at 90° that provides resistance to gravity and uplift loads
USES
Pryda Framing Brackets are suitable for fixing joist to joist joist to beam truss to truss rafter to purlin and hangers to joists.
FEATURES
SIMPLE: Can be installed without needing to ..
$3.76
Ex Tax:$3.27
Model: MPFB52174
Simple means of connecting two members at 90° that provides resistance to gravity and uplift loads
USES
Pryda Framing Brackets are suitable for fixing joist to joist joist to beam truss to truss rafter to purlin and hangers to joists.
FEATURES
SIMPLE: Can be installed without needing to ..
$5.77
Ex Tax:$5.02
Model: MP4R10
Hammer fixed and easy to use connector for multiple applications
USES
Pryda Knuckle Nailplates are galvanised steel connectors with in-built bent-up “knuckle” nails. These plates are ideal for many structural and non-structural timber jointing and timber protection uses.
Among the many uses t..
$1.69
Ex Tax:$1.47
Model: NPPC8
Strong and rigid connection frequently used to connect trusses/rafters to beams and wall plates
USES
Pryda Purlin Cleats provide strong rigid connection for trusses rafters and beams to wall plates and wall plates to studs.
FEATURES
SIZE: 85 x 30 x 80mm
SIMPLE: Can also be used to connect..
$4.00
Ex Tax:$3.48
Model: NPP2G
USES
The Pryda Pole to Girt bracket provides a robust means of fixing timber girts to poles in Pole & Rafter buildings.
FEATURES
SIMPLE: Butterfly shape design to accommodate connection for both flat and round timber members.
FAST: No checking of timber required when attaching a girt to either..
$7.81
Ex Tax:$6.79
Model: TCS12-35/1K
Make sure your connection is compliant
USES
The Pryda Timber Connector Screw is specifically designed for fixing Pryda timber connectors. Where a Pryda product specifies Pryda Timber Connector Screw be sure to use the genuine product.
FEATURES
FAST: Screw self-drilling technology for faster..
$0.33
Ex Tax:$0.29
Model: HH1475S
Make sure your connection is compliant
USES
The Pryda Timber Connector Screw is specifically designed for fixing Pryda timber connectors. Where a Pryda product specifies Pryda Timber Connector Screw be sure to use the genuine product.
FEATURES
FAST: Screw self-drilling technology for faster i..
$100.11
Ex Tax:$87.05
Model: HH1475G
Make sure your connection is compliant
USES
The Pryda Timber Connector Screw is specifically designed for fixing Pryda timber connectors. Where a Pryda product specifies Pryda Timber Connector Screw be sure to use the genuine product.
FEATURES
FAST: Screw self-drilling technology for faster i..
$100.11
Ex Tax:$87.05
Model: SBS400
Versatile fixing primarily used to fix sheet braced wall panels to timber floors and concrete slabs (via bottom plate).
Can also be used for:
Other sheet braced wall connections
Joining rafters over walls/beams
Fixing lintels against uplift
NZ SHEET BRACE STRAPS DATA SHEET
Building Produ..
$2.33
Ex Tax:$2.03
Model: P-SB30
Pryda Strap Brace is suitable for bracing walls and truss/rafter roof construction (spans up to 12m) in residential buildings. Use Pryda Maxi Strap for larger spans and commercial and industrial buildings.
Pryda Tensioners provide a fast reliable and simple method of tensioning long lengths of b..
$77.75
Ex Tax:$67.61
Model: SBT
Tensioner can be used with a drill to speed up tensioning. Unlike Speed or Angle Brace, can be partially fastened but not tensioned allowing for plumb adjustment of wall frames prior to tensioning.Building Product Information..
$2.46
Ex Tax:$2.14
Model: ZBPF12KNRBOM
Features & BenefitsFixing designed to be used with bearers that have the outside face concealed. Specifically for when fixing relocatable house to piles...
$61.33
Ex Tax:$53.33
Model: B178
Hot Dip Galvanised angle brackets to support timber members at 90 degrees.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$34.99
Ex Tax:$30.43
Model: BS55
Stainless Steel angle brackets to support timber members.All bolt holes to accommodate M12 boltsStainless steel..
$45.84
Ex Tax:$39.86
Model: BS176
Stainless Steel angle brackets to support timber members at 90 degrees.All bolt holes to accommodate M12 boltsStainless steel..
$103.19
Ex Tax:$89.73
Special Order
Model: BS175
Stainless Steel angle brackets to support timber members at 90 degrees.All bolt holes to accommodate M12 boltsStainless steel..
$71.94
Ex Tax:$62.56
Model: B135
Hot Dip Galvanised brackets to support timber posts into concrete base.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2Nails and Bolt included. Building Product Information..
$38.99
Ex Tax:$33.90
Model: B138
Hot Dip Galvanised brackets to support timber posts into concrete base.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2Nails and Bolt included. Building Product Information..
$41.99
Ex Tax:$36.51
Model: B145
Hot dip galvanised bracket to connect timber braces to poles.Hot dip galvanised to AS/NZS 4680 to 600gm/m2Supplied with assembly bolts and bolts for brace.Building Product Information..
$70.99
Ex Tax:$61.73
Model: B175
Hot Dip Galvanised angle brackets to support timber members at 90 degrees.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$16.49
Ex Tax:$14.34
Model: B177
Hot Dip Galvanised angle brackets to support timber members at 90 degrees.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$26.99
Ex Tax:$23.47
Model: B197
Hot Dip Galvanised brackets to support timber posts into concrete base.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$56.99
Ex Tax:$49.56
Special Order
Model: B25
Hot Dip Galvanised brackets to support timber posts onto concrete base.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2Nails, Bolt and 2 Dyna Bolts included. Building Product Information..
$33.99
Ex Tax:$29.56
Model: B28
Hot Dip Galvanised brackets to support timber posts onto concrete base.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2Nails, Bolt and 2 Dyna Bolts included. Building Product Information..
$36.49
Ex Tax:$31.73
Model: B350
Hot Dip Galvanised angle brackets to support timber members.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$3.98
Ex Tax:$3.46
Model: B38
Hot Dip Galvanised straps to fix posts / beams together in same plane.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$44.99
Ex Tax:$39.12
Model: B45
Hot Dip Galvanised straps to fix posts / beams together in same plane.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$25.99
Ex Tax:$22.60
Model: B48
Hot Dip Galvanised straps to fix posts / beams together in same plane.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$43.99
Ex Tax:$38.25
Model: B50
Hot Dip Galvanised angle brackets to support timber members.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2.Building Product Information..
$5.99
Ex Tax:$5.21
Model: B51
Hot Dip Galvanised angle brackets to support timber members.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$7.99
Ex Tax:$6.95
Model: B52
Hot Dip Galvanised angle brackets to support timber members, i.e. shelving etc.All bolt Holes to accommodate M12 bolt unless notedHot dipped galvanised..
$10.74
Ex Tax:$9.34
Model: B54
Hot Dip Galvanised angle brackets to support timber members, i.e. shelving etc.All bolt Holes to accommodate M12 bolt unless notedHot dipped galvanised..
$18.38
Ex Tax:$15.98
Model: B55
Hot Dip Galvanised angle brackets to support timber members, i.e. shelving etc.All bolt Holes to accommodate M12 bolt unless notedHot dipped galvanised..
$13.90
Ex Tax:$12.09
Model: B75
Hot Dip Galvanised straps to fix posts / beams together in same plane...
$17.72
Ex Tax:$15.41
Model: B85
Hot Dip Galvanised straps to fix posts / beams together in same plane...
$14.63
Ex Tax:$12.72
Model: B86
Hot Dip Galvanised straps to fix posts / beams together in same plane...
$19.60
Ex Tax:$17.04
Model: B88
Hot Dip Galvanised straps to fix posts / beams together in same plane...
$22.06
Ex Tax:$19.18
Model: BS145
Pole Brace Bracket..
$98.33
Ex Tax:$85.50
Model: BS197
Stainless Steel brackets to support timber posts onto / into concrete base.All components are hot dip galvanised to AS/NZS 4680 to 600gm/m2...
$98.99
Ex Tax:$86.08
Special Order
Model: BS35
Stainless Steel straps to fix posts / beams together in same plane...
$44.91
Ex Tax:$39.05
Model: BS45
Stainless Steel straps to fix posts / beams together in same plane...
$57.48
Ex Tax:$49.98
Model: BS75
Stainless Steel straps to fix posts / beams together in same plane...
$41.72
Ex Tax:$36.28
Model: BS85
Stainless Steel straps to fix posts / beams together in same plane...
$34.73
Ex Tax:$30.20
Model: BS88
Stainless Steel straps to fix posts / beams together in same plane...
$49.24
Ex Tax:$42.82
Model: SL170
Provides a solution for top plate to stud fixings for residential timber frame buildingsComplies with fixing requirements in Section 8 NZS 3604:2011The BOWMAC® STUD-LOK forms an integral part of the MiTek Truss & Framedesign and layoutAvailable in 2 lengths allowing for connections from stud to ..
$369.99
Ex Tax:$321.73
Model: B35
Hot Dip Galvanised straps to fix posts / beams together in same plane.Holes for M12 boltsHot dip galvanised to AS/NZS 4680 to 600gm/m2. Building Product Information..
$25.99
Ex Tax:$22.60
Model: BS38
Hot Dip Galvanised straps to fix posts / beams together in same plane...
$94.42
Ex Tax:$82.10
Special Order
Model: ENDCAP15494
End Bearer Caps are designed to cover the ends of decking bearers etc. ..
$14.27
Ex Tax:$12.41
Model: ENDCAP11090
End Bearer Caps are designed to cover the ends of decking bearers etc. ..
$16.65
Ex Tax:$14.48
Special Order
Model: ENDCAP14590
End Bearer Caps are designed to cover the ends of decking bearers etc. ..
$13.59
Ex Tax:$11.82
Special Order
Model: BHX12KNRETRO
Features & BenefitsFixing designed to be used with bearers that have the outside face concealed. Specifically for when fixing relocatable house to piles...
$55.86
Ex Tax:$48.57
Special Order
Model: CFSBH10127GBU
..
$7.00
Ex Tax:$6.09
Special Order
Model: GHB
Developed in conjunction with MiTekTM, the GIB HandiBrac® has been designed and tested by Winstone Wallboards for use in GIB® BL and UP bracing elements. The GIB HandiBrac® is a substitute for bottom plate hold-down straps. Quick and easy to fitMay be fitted at any stage before l..
$15.64
Ex Tax:$13.60
Model: HFW200
Gorilla Wooden Wedges are pre-cut to size for increased ease and accuracy of spacing. Each wedge is approx. 150mm long, 13mm wide and sloped from 13mm high to 2mm low.Features and Benefits:Multiple pack sizesManufactured from natural woodSlim designAssists with accurate spacingBuilding Product Infor..
$59.00
Ex Tax:$51.30
Special Order
Model: LLCR1.8
This attractive product provides an alternative to bar or timber rails in wardrobe situations. Manufactured from extruded aluminium, the closet rail enhances wardrobe appearances and also provides additional support strength to the closet shelf. ..
$76.48
Ex Tax:$66.50
Special Order
Model: LLCR2.4
This attractive product provides an alternative to bar or timber rails in wardrobe situations. Manufactured from extruded aluminium, the closet rail enhances wardrobe appearances and also provides additional support strength to the closet shelf. ..
$100.34
Ex Tax:$87.25
Special Order
Model: LLCRW3.6
This attractive product provides an alternative to bar or timber rails in wardrobe situations. Manufactured from extruded aluminium, the closet rail enhances wardrobe appearances and also provides additional support strength to the closet shelf. ..
$130.02
Ex Tax:$113.06
Special Order
Model: LLBS
Specifically developed for use as a purlin and batten fixing. Complies with NZS3604:2011. This unique 80mm x 10g screw is blue in colour making it easily identifiable...
$55.89
Ex Tax:$48.60
Model: 12KN
The 12kN pack is suitable for both anchor and brace pile situationsComply with NZS 3604:2011 as a fixing method for timber piles to bearers to joistsAll packs are supplied inclusive of all necessary nails. Building Product Information..
$37.98
Ex Tax:$33.03
Special Order
Model: 12KNRFH
An ideal fixing to be used when the outside face of the bearer is not accessible, such as with relocatable houses to piles. The specially developed Retro Plates are used for connecting pile to bearers to joists and are easily fixed in constricted situations with Type 17-12g x 35mm Hex Head Screws (s..
$87.39
Ex Tax:$75.99
Special Order
Model: SSSBS3
Sheet Brace Straps0.9mm x 25mm Stainless Steel 304-2BPunched strap available in lengths of 200mm, 300mm, 400mm and 600mm. Fixed with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter...
$5.18
Ex Tax:$4.50
Model: SSSBS4
Sheet Brace Straps0.9mm x 25mm Stainless Steel 304-2BPunched strap available in lengths of 200mm, 300mm, 400mm and 600mm. Fixed with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter...
$8.94
Ex Tax:$7.77
Special Order
Model: SSSBS6
Sheet Brace Straps0.9mm x 25mm Stainless Steel 304-2BPunched strap available in lengths of 200mm, 300mm, 400mm and 600mm. Fixed with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter...
$12.64
Ex Tax:$10.99
Model: 6KNH
12kN & 6kN Pile FixingsBoth these products comply with NZS 3604:2011 as a fixing method for timber piles to bearers to joists. The 12kN product pack is suitable for both Anchor and Brace pile situations whilst the 6kN pack is used with cantilever piles.Manufactured in stainless steel to suit hig..
$41.43
Ex Tax:$36.03
Model: SBP
12kN & 6kN Pile Fixings Both these products comply with NZS 3604:2011 as a fixing method for timber piles to bearers to joists. The 12kN product pack is suitable for both Anchor and Brace pile situations whilst the 6kN pack is used with cantilever piles. Each product is manufactured in..
$11.63
Ex Tax:$10.11
Model: AB36
Angle Brace0.85mm G300 Z275 Galvanised Steel Angle Brace may be used as either compression or tension brace.Nail holes are fully punched for ease of nailing.Fix with 60mm x 3.15mm diameter nails.When used as a diagonal wall brace, it should be secured at each end with three nails, and two nails..
$17.86
Ex Tax:$15.53
Model: BPA
Bottom Plate Fixing Anchor0.95mm G300 Z450 Galvanised Steel Ingenious product designed to fix timber wall frames down onto concrete slab floors. Bottom Plate Anchors are temporarily fixed to the perimeter boxing at 900mm centres max. Prior to the concrete pour, and folded around the bottom plat..
$2.88
Ex Tax:$2.50
Model: CT160LH
A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Product Nails 30mm x 3.15mm diameter.Size: 160 x 27 x 1mm..
$1.89
Ex Tax:$1.64
Model: CT200LH
Overall length 200mm – A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Product Nails 30mm x 3.15mm diameter...
$1.55
Ex Tax:$1.35
Model: SSCT160LH
A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter.Size: 160mm x 27mm x 1mm..
$3.71
Ex Tax:$3.23
Model: SSCT200LH
A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter.Size: 200mm x 27mm x 1mm..
$3.80
Ex Tax:$3.30
Model: CT160RH
A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Product Nails 30mm x 3.15mm diameter.Size: 160 x 27 x 1mm..
$1.89
Ex Tax:$1.64
Model: CT200RH
Overall length 200mm – A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection.Fix with LUMBERLOK Product Nails 30mm x 3.15mm diameter...
$1.55
Ex Tax:$1.35
Model: SSCT160RH
A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter.Size: 160mm x 27mm x 1mm..
$3.71
Ex Tax:$3.23
Model: SSCT200RH
A very useful connector primarily for fixing ceiling joists to rafter or truss members. It also provides an excellent truss or rafter to top plate connection. Fix with LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter.Size: 200mm x 27mm x 1mm..
$3.80
Ex Tax:$3.30
Model: CPC40
Nominal Rafter Width50100CleatCPC40 or CPC40SCPC80 CPC cleats provide an excellent purlin/rafter fixing in exposed situations, resisting any wind uplift. The cleats can also be used for exposed rafter to ridge beam connections. Fixed with Type 17-14g Hex Head Screws and LUMBERLOK Product ..
$2.07
Ex Tax:$1.80
Model: CPC40SS
Nominal Rafter Width50100CleatCPC40 or CPC40SCPC80 CPC cleats provide an excellent purlin/rafter fixing in exposed situations, resisting any wind uplift. The cleats can also be used for exposed rafter to ridge beam connections.Fixed with Type 17-12g Hex Head Stainless Steel Screws and LUM..
$4.42
Ex Tax:$3.84
Model: CPC80
Nominal Rafter Width50100CleatCPC40 or CPC40SCPC80 CPC cleats provide an excellent purlin/rafter fixing in exposed situations, resisting any wind uplift. The cleats can also be used for exposed rafter to ridge beam connections. Fixed with Type 17-14g Hex Head Screws and LUMBERLOK Product ..
$3.48
Ex Tax:$3.03
Model: CPC80SS
Nominal Rafter Width50100CleatCPC40 or CPC40SCPC80 CPC cleats provide an excellent purlin/rafter fixing in exposed situations, resisting any wind uplift. The cleats can also be used for exposed rafter to ridge beam connections.Fixed with Type 17-12g Hex Head Stainless Steel Screws and LUMBERLOK..
$6.69
Ex Tax:$5.82
Model: CF1
Both cleats provide a quick and economical method of joining timber trusses, beams, columns to solid concrete or grouted concrete blockwork.Both cleats can be used on one or two sides of timber members, depending on the loads required. Fixed with LUMBERLOK Product Nails 30mm x 3.15mm diameter a..
$10.78
Ex Tax:$9.37
Model: CT400
Designed specifically for fixing down rafters or purlins in high wind situations. These are produced in straight pre-twisted lengths which are then folded over timber members on-site, therefore accommodating various width purlins or rafters. Fix with LUMBERLOK Product Nails 30mm x 3.15mm diameter.Si..
$2.97
Ex Tax:$2.58
Model: CT600
Lumberlok Cyclone Ties - GalvanisedDesigned specifically for fixing down rafters or purlins in high wind situations. These are produced in straight pre-twisted lengths which are then folded over timber members on-site, therefore accommodating various width purlins or rafters. Fix with LUMBERLOK Prod..
$4.13
Ex Tax:$3.59
Special Order
Model: SSCT400
Designed specifically for fixing down rafters or purlins in high wind situations. These are produced in straight pre-twisted lengths which are then folded over timber members on-site, therefore accommodating various width purlins or rafters. Fix with LUMBERLOK Stainless Steel Product Nails 30mm..
$7.87
Ex Tax:$6.84
Special Order
Model: SSCT600
Designed specifically for fixing down rafters or purlins in high wind situations. These are produced in straight pre-twisted lengths which are then folded over timber members on-site, therefore accommodating various width purlins or rafters. Fix with LUMBERLOK Stainless Steel Product Nails 30mm..
$9.23
Ex Tax:$8.03
Model: HB
Developed in conjunction with MiTekTM, the GIB HandiBrac® has been designed and tested by Winstone Wallboards for use in GIB® BL and UP bracing elements. The GIB HandiBrac® is a substitute for bottom plate hold-down straps. Quick and easy to fitMay be fitted at any stage before l..
$23.45
Ex Tax:$20.39
Model: GP
Specifically designed for girt to pole fixing, as per Farm Building Designs. 120mm long Nailon Plate, slit and pre-folded to 90 deg. Fixed with min. 8 x LUMBERLOK Product Nails 30mm x 3.15mm diameter each face (16/cleat)...
$5.88
Ex Tax:$5.11
Model: SSGP
Specifically designed for girt to pole fixing, as per Farm Building Designs. 120mm long Nailon Plate, slit and pre-folded to 90 deg. Fixed with min. 8 x LUMBERLOK Stainless Steel Product Nails 30mm x 3.15mm diameter each face (16/cleat)...
$12.09
Ex Tax:$10.51
Model: HBA
This product has been developed to complement the Bottom Plate Anchor, where concrete header blocks are used to form the concrete slab perimeter. The product is clipped onto the block edge at 600mm centres max. and left until the slab is poured and frames ready to stand up. The tongue is then lifted..
$3.06
Ex Tax:$2.66
Special Order
Model: IBHF24050
Developed to provide an effective method of fixing timber I-Beams in floor situations, the Face Fix option is suitable for connecting to supporting timberbeams, whereas the Top Fix option can be used to fix to supporting steel beams with a timber top plate. Several sizes available to accommodate a w..
$11.78
Ex Tax:$10.24
Model: IBHF30050
Developed to provide an effective method of fixing timber I-Beams in floor situations, the Face Fix option is suitable for connecting to supporting timberbeams, whereas the Top Fix option can be used to fix to supporting steel beams with a timber top plate. Several sizes available to accommodate a w..
$13.81
Ex Tax:$12.01
Model: IBHF24065
Developed to provide an effective method of fixing timber I-Beams in floor situations, the Face Fix option is suitable for connecting to supporting timberbeams, whereas the Top Fix option can be used to fix to supporting steel beams with a timber top plate. Several sizes available to accommodate a w..
$11.67
Ex Tax:$10.15
Special Order
Model: IBHF30065
Developed to provide an effective method of fixing timber I-Beams in floor situations, the Face Fix option is suitable for connecting to supporting timberbeams, whereas the Top Fix option can be used to fix to supporting steel beams with a timber top plate. Several sizes available to accommodate a w..
$13.62
Ex Tax:$11.84
Special Order
Model: IBHF36065
Developed to provide an effective method of fixing timber I-Beams in floor situations, the Face Fix option is suitable for connecting to supporting timberbeams, whereas the Top Fix option can be used to fix to supporting steel beams with a timber top plate. Several sizes available to accommodate a w..
$16.30
Ex Tax:$14.17
Special Order
Model: IBHF20090
Developed to provide an effective method of fixing timber I-Beams in floor situations, the Face Fix option is suitable for connecting to supporting timberbeams, whereas the Top Fix option can be used to fix to supporting steel beams with a timber top plate. Several sizes available to accommodate a w..
$14.71
Ex Tax:$12.79